| The following is expanded content from our new book Rainmaking Conversations: Influence, Persuade, and Sell in Any Situation. In this piece, co-authors Mike Schultz and John Doerr explain how to get at the root causes of need so you can solve prospect challenges in the most permanent and helpful way. Read more about the book here. |
"It’s not that they can’t see the solution, it’s that they can’t see the problem.”
- G.K. Chesterton
One day the production line stopped suddenly, and the whole plant shut down.
It was horrible!
The company lost tens of thousands of dollars an hour by not turning out widgets as the staff stood idly by and waited.
The problem was in the ViperAssembly machine. No matter what they tried, they just couldn’t fix it for good. They replaced the McGurnkney nut and it worked for about a day. Then it stopped again. Then they tried realigning the Johnson rod, and that fix only lasted 3 hours.
So they called in old Gaylen Tyrol. Recently retired, he operated the ViperAssembly machine for 30 years, and he knew everything about it. He turned the machine on and listened to it sputter. Then he reached into the machine, pulled out the Gimbel, replaced it with a new one, and turned it back on.
It ran, and ran and ran. For 5 years without another issue.
Gaylen knew that when a Gimbel is faulty, it makes the McGurkney nut overheat and melt, and that replacing it wouldn’t fix anything.
He knew that when the McGurkney nut melts, the Johnson Rod comes out of alignment. So fixing the Johnson rod wouldn’t fix the problem either.
It all starts with Gimbel. Fix the Gimbel, and fix the root of the problem.
When sales people uncover challenges, it’s very tempting to jump to a solution quickly. But if the challenge is more a symptom than a root cause, a solution will be temporary only, and the problem will come back over and over.
It’s up to you as a sales person to find, and solve, root causes. Do so, and you’ll make the biggest difference and deliver the strongest value to your customers.
Want to know how to do it?
Learn the Five Whys.
The Five Whys is a root-cause analysis technique pioneered by Taichi Ohno of the lean manufacturing movement that helps business leaders to get past putting Band-Aids on the symptoms of a problem, and instead address the underlying causes, thus permanently solving the problem and creating a lasting new reality.
The Five Whys help you work with prospects to uncover the root causes of what is driving their needs, and craft the most compelling, powerful, and lasting solutions.
Essentially, the Five Whys is to problem solving and critical thinking what removing weeds at the root is to gardening. Fix a symptom in business but not the underlying cause, and, much like a pulled weed with the root left in the ground, the symptom is bound to sprout up again. Fix the underlying cause of a problem at the root, and you will see lasting improvement.
Here’s how it works. When presented with a problem, ask questions that start with why? Why did that happen? Why will this solve the problem? Why are things the way they are?
Download: 50 Powerful Sales Questions
For example, let’s say a prospect says to you, “We need more training for our IT staff because we’re receiving too many complaints about bad service.” Here’s how it might go.
You: ‘‘Why are you are receiving too many complaints about your service?’’ (Why 1)
Prospect: ‘‘Because response times are slow.’’
You: ‘‘Why are response times slow?’’ (Why 2)
Prospect: ‘‘Because our staff always seems backed up, no matter what we do.’’
You: ‘‘Why is the staff always backed up?’’ (Why 3)
Prospect: ‘‘Because requests come in that are deemed urgent that really aren’t, and the ones that are urgent don’t get immediate response. So we’re always reacting like crazy every minute of the day.’’
You: ‘‘Why can’t you differentiate between the really urgent problems and the not-so-urgent problems?’’ (Why 4)
Prospect: ‘‘Because we don’t have definitions of what constitutes urgent, and we don’t have a sufficient job ticket management system to help us keep it straight if we did.’’
You: ‘‘Why don’t you have a job ticket management system that can help you keep it all sorted out?’’ (Why 5)
Prospect: ‘‘Because we looked at this two years ago and we didn’t need it, but now we’re twice the size and have so much more volume. No one’s brought it up again with Jane, our COO, who makes the decisions about these kinds of things.’’
You: ‘‘Why hasn’t anyone brought it up with Jane?’’ (Why 6)
Prospect: Silence.
You: ‘‘Is training for the IT staff what you need, or should you re-engage Jane about how a job ticket management system will improve response times and reduce complaints?’’
Prospect: ‘‘Time to talk to Jane.’’
You: ‘‘Then you need to get approval, and install the job ticket management system?’’
Prospect: ‘‘Right again.’’
You: ‘‘Let’s talk about what you need in a job ticket management system, then. We see three options. One is right, depending on a few factors. Let’s have a look.’’
When using the Five Whys – do not stop at the first need you uncover and think you can fix it. Rainmakers who are capable of getting to the bottom of things create stronger relationships, stronger foundations of trust, and are seen as problem solvers and change agents. In turn, this keeps the competition closed out and enables them to sell to clients year after year.
When using the Five Whys in your sales conversations, keep the following in mind:
If you employ the Five Whys you’ll know that as you uncover needs and craft solutions, you’ll be addressing the root causes, solving problems effectively and for the long term.
If you’re keen to give the Five Whys a try and looking for a place to start, here’s an example of a set of why questions you can ask about your team’s sales success.